IBM PC Server 325, User Handbook Manual

Page: 263 / 288

Removing the Drawer Model from a Rack
To remove the PC Server 325 from a 19-inch rack enclosure:
1. Unlock and remove the front door on the server.
Flange
2. Remove the screw from each side of the front bezel. Set the
screws aside for later use.
3. Slide the server out of the rack.
4. If you have a modem or fax machine attached to the server,
disconnect the telephone line from the wall outlet and the
server.
Note: If you are in the United Kingdom, you must perform this
step before disconnecting the power cord.
5. Disconnect all cables and power cords from the rear of the
server.
6. Remove the two screws from the cable arm bracket.
Appendix D. Installing a PC Server 325 in a Server Rack
249