IBM PC Server 325, User Handbook Manual

Page: 69 / 288

Preparing to Add Options
Preparing to Add Options
Before you begin
Ÿ Be sure your current server configuration is working
properly.
Ÿ
Locate the key to the cover lock.
Ÿ Obtain a small, flat-blade screwdriver.
Ÿ Read “Electrical Safety” on page 53 and “Handling
Static-Sensitive Devices” on page 54.
1. Unlock and open the server door.
2. Remove any media (diskettes or CDs) from the drives, and then
turn off all attached devices and the server.
3. If you have a tower model, continue with “Preparing a Tower
Model.”
If you have a drawer model, go to “Preparing a Drawer Model”
on page 58.
Preparing a Tower Model
1. If you have a modem or fax machine attached to the server,
disconnect the telephone line from the wall outlet and the
server.
Note: If you are in the United Kingdom, you must perform this
step before disconnecting the power cord.
Chapter 3. Installing Options
55