IBM PC Server 325, User Handbook Manual, Page: 157 / 288

Error Messages
POST Message Description
114 An adapter read-only memory (ROM) error occurred.
Action: Remove the options. If you can start the system
without the option installed, reinstall each option and
retest. When an option fails, replace it.
If you cannot isolate and correct the problem, have the
system serviced.
129 An internal cache error occurred.
Action: Have the system serviced.
151 A failure occurred during the testing of the real-time clock.
Action: Have the system serviced.
162 A change in device configuration occurred. This error occurs
under one or more of the following conditions:
Ÿ
A new device has been installed.
Ÿ
A device has been moved to a different location or cable
connection.
Ÿ
A device has been removed or disconnected from a cable.
Ÿ
A device is failing and is no longer recognized by the
server as being installed.
Ÿ An external device is not turned on.
Ÿ An invalid checksum is detected in the battery-backed
memory.
Action: Verify that all external devices are turned on. You
must turn on external devices before turning on the
server.
If you did not add, remove, or change the location of a
device, a device is probably failing. Running the
diagnostic programs might isolate the failing device,
but you must have the system serviced.
163 The time of day has not been set.
Action: Set the correct date and time. If the date and time
are set correctly and saved and the 163 error message
reappears, have the system serviced.
Until the system is serviced, the server can be used, but
any application programs that use the date and time
will be affected.
Chapter 4. Solving Problems
143