IBM PC Server 325 User Handbook Manual Download Page 13 | Manualshive

Page: 13 / 288

IBM PC Server 325 User Handbook Manual Download Page 13

Related Publications

Related Publications

The following publications come with your PC Server 325:

The PC Server 325 Setup and Installation sheet contains
information about setting up your server.

The PC Server 325 User's Reference contains detailed information
about the advanced features of your server.

The PC Server Service and Support pamphlet contains important
information and phone numbers to call for different types of
support for your PC Server.

The ServerGuide documentation describes the advantages of IBM
ServerGuide and describes how to use the ServerGuide software.

The IBM PC Servers Hardware Maintenance Manual Supplement is
available for purchase. It contains a parts catalog, error codes, and
advanced diagnostic procedures. This manual is intended for
trained service technicians. (Diagnostic diskettes are not included.)

The following pertain to the server's Ethernet controller.

IBM LAN Technical Reference IEEE 802.2 and NETBIOS API,
SC30-3587

IBM Transmission Control Protocol/Internet Protocol Version 2.1 for
DOS: Programmer’s Reference, SC31-7046

IBM LAN Server Command and Utilities, S10H-9686

Guide to LAN Server Books, S10H-9688

DOS LAN Services and User's Guide, S10H-9684

Additional publications are available for purchase from IBM. For a
list of publications available in your country:

In the U.S. and Puerto Rico, call 1-800-426-7282.

In Canada, call 1-800-465-1234.

In other countries, contact the IBM support organization that
services your area, your IBM marketing representative, or your
IBM reseller.

About This Book

xiii

«
...
11
12
13
14
15
...
»

Summary of Contents for PC Server 325

































































































































































































































































































Reviews:

No comments