IBM PC Server 325, User Handbook Manual

Page: 72 / 288

Preparing to Add Options
Preparing a Drawer Model
You can install the PC Server 325 in a drawer in a 19-inch rack unit.
Refer to the documentation that comes with the rack for additional
safety and operating information.
To install options in a drawer model:
1. Unlock and open the door on the front of the server.
2. Remove the front door:
a. Locate the flange on the top edge of the front door, near the
hinge.
b. Press the flange while pressing out on the door; then lift the
door off the hinge and store in a safe place.
Flange
3. Remove the screws on either side of the front bezel, and set
them aside.
4. Pull the drawer out until both slide rails lock, and you can
easily reach the cables on the back of the server.
58
PC Server 325 User's Handbook