IBM PC Server 325, User Handbook Manual

Page: 40 / 288

Using the Configuration/Setup Utility Main Menu
Date and Time
Select this choice to set the system date and time.
The system time is in a 24-hour format: hour/minute/second. The
system date is in standard format for your country. For example, in
the United States, the format is MM/DD/YY (Month/Day/Year).
Select Date and Time, then use the Left Arrow (
←
) and Right
Arrow (
→
) keys to advance through each data field. Type the new
information; the system saves the information as you type it.
The Date and Time choice appears only on the full
Configuration/Setup menu.
Alarm/Wakeup Settings
You can start your server manually or at a predefined event. The
server enters one of the following states.
Attended mode This is the “on” state that occurs when you
press the power switch from the Standby or
Unattended mode. The Power-On light comes
on whenever the server is on.
Unattended mode
The server starts at a specified date and time,
or when it receives a signal from either serial
port. When the server powers on in the
Unattended mode, the Unattended Power-On
light and the Power-On light come on.
Standby mode The server is powered down. The automatic
restart feature, which enables the server to
restart following a momentary power loss,
means that the server is never completely
turned off.
The server must be in the Standby mode (off)
for the Alarm/Wakeup Settings features that
you define to take effect.
Select the Alarm/Wakeup Settings choice to enable and disable the
Unattended mode.
26
PC Server 325 User's Handbook