Error Messages
POST Message
Description
1806
A PCI-to-PCI bridge error has occurred. More than one PCI
bus tried to access memory below 1 MB.
Action: Remove the PCI adapter that has the PCI bridge. If
you can start the system without the adapter, reinstall
the adapter and retest. When an option fails, replace it.
If you cannot isolate and correct the problem, have the
system serviced.
2400
A failure occurred during testing of the video controller on
the system board. This error can be caused by a failing
monitor, a failing system board, or, if a video adapter is
installed, a failing video adapter.
Action: Verify that the monitor is connected correctly to the
video connector. If it is have the system serviced.
2462
A video memory configuration error occurred.
Action:
1. Make sure the monitor cables are correctly and
securely connected to the system.
2. If the error persists, have the system serviced.
8603
A failure occurred during testing of the pointing device
(mouse) and pointing device controller. This error can be
caused by the addition or removal of a pointing device or by
a failing system board.
Note: This error also can occur if electrical power was lost for
a very brief period and then restored. In this case, turn
off the server for at least 5 seconds, and then turn it
back on.
Action: Ensure that the keyboard and pointing device are
attached to the correct connectors. If they are
connected correctly, use the following procedure:
1. Turn off the server.
2. Disconnect the pointing device from the server.
3. Turn on the server.
If the POST error message does not reappear, the
pointing device is probably failing. (See the
documentation that comes with the pointing device for
additional testing information.) If the problem remains,
have the pointing device serviced.
If the POST error message reappears, run the
diagnostic tests to isolate the failure. If the diagnostic
tests do not find a problem and the POST error
message remains, have the system serviced.
150
PC Server 325 User's Handbook
Summary of Contents for PC Server 325
