IBM PC Server 325, User Handbook Manual

Page: 255 / 288

Installing the Drawer Model in a Rack
d. Attach a washer and a nut to each screw. Do not tighten the
nuts at this time.
3. Attach the brackets to the left side of the rack:
a. Extend the outer slide rail until it is flush against the inside
of the left front mounting rail. Align the slide rail with the
marked holes on the mounting rail.
b. Align the holes on the bar nut with the holes on the slide
rail and mounting rail.
c. From the front of the rack, insert two long screws through
the mounting rail, slide rail, and bar nut. Press the slide rail
until it is flush with the inner edge of the mounting rail;
then, tighten the screws.
Appendix D. Installing a PC Server 325 in a Server Rack
241