IBM PC Server 325 User Handbook Manual Download

Page: 266 / 288

Trademarks

The following terms are trademarks of other companies:

Microsoft, Windows, and Windows NT are trademarks or registered
trademarks of Microsoft Corporation.

UNIX is a registered trademark in the United States and other
countries licensed exclusively through X/Open Company Limited.

Other company, product, and service names, which may be denoted
by a double asterisk (

), may be trademarks or service marks of

others.

America Online

America Online, Inc.

ARCnet

Datapoint Corporation

CompuServe

CompuServe Incorporated

Intel

Intel Corporation

IPX

Novell, Inc.

LANtastic

Artisoft Inc.

NetWare

Novell, Inc.

Novell

Novell, Inc.

Overdrive

Intel Corporation

Pentium

Intel Corporation

PRODIGY

Prodigy Service Company

QAPlus

DiagSoft, Inc.

QAPlus/PRO

DiagSoft, Inc.

SCSISelect

Adaptec, Inc.

Solaris

Sun Microsystems, Inc.

SunSoft

Sun Microsystems, Inc.

UnixWare

Novell, Inc.

252

PC Server 325 User's Handbook

Summary of Contents for PC Server 325

































































































































































































































































































Search results

Summary of Contents for PC Server 325

Reviews:

Related manuals for PC Server 325

Brands by name

Popular brands

IBM PC Server 325, User Handbook Manual

Search results

Summary of Contents for PC Server 325

Reviews:

Related manuals for PC Server 325

Brands by name

Popular brands