Epson EpsonNet 802.11b Product Support Bulletin Download

Page: 1 / 30

Page

1 of 6

EPSON

RODUCT

UPPORT

ULLETIN

Date:

4/30/2003

Originator:

PSB #:

PSB.2003.05.005

Authorization:

Reference:

N/A

Total Pages:

Product(s):

EpsonNet 802.11b Wireless Print Server

Subject:

OS X Procedure for Updating the Firmware

This bulletin was created to inform you of the procedural steps used to update the EpsonNet
802.11b Wireless Print Server firmware using the OS X Terminal Utility.

Procedure:

1.) Configure the Macintosh and the EpsonNet 802.11b Wireless Print Server for TCP/IP.

2.) Download/copy the “WLEP399.bin” firmware file to the Desktop.

3.) Navigate to Macintosh HD>Applications>Utilities>Terminal, and launch the Terminal

Utility program.

4.) At the Terminal program screen do the following:

Type cd desktop, press RETURN

Summary of Contents for EpsonNet 802.11b































Search results

Summary of Contents for EpsonNet 802.11b

Reviews:

Related manuals for EpsonNet 802.11b

Brands by name

Popular brands

Epson EpsonNet 802.11b, Product Support Bulletin

Search results

Summary of Contents for EpsonNet 802.11b

Reviews:

Related manuals for EpsonNet 802.11b

Brands by name

Popular brands