IBM PC Server 325, User Handbook Manual, Page: 172 / 288

Ethernet Controller Messages
PCNTW-DOS-1 The LSL is not loaded.
Explanation: The Link Support support module (LSL.COM) is not loaded.
Action: Load LSL.COM; then, load the device driver.
PCNTW-DOS-2 The LSL has no more room for a board using Frame
<
string
>
.
Explanation: The maximum number of adapters, whether virtual or physical, has
been registered with the Link Support Layer. In the PC Server 325, the DOS ODI
LSL can support up to five PCI Ethernet adapters, plus the Ethernet controller in the
system board.
Action: Reduce the number of active adapters in the systems by removing an
adapter, or by decreasing the number of frame types activated by Multiple Link
Interface Driver (MLID).
PCNTW-DOS-3 Could not find PCNTNW MLID to unload.
Explanation: A request was made to unload PCNTNW MLID, but the MLID is not
loaded.
Action: None.
PCNTW-DOS-4 A TSR is loaded above the PCNTNW MLID.
Explanation: You tried to unload the PCNTNW MLID from memory, but the
PCNTNW MLID detected another Terminate and Stay Resident (TSR) program
loaded above the MLID. For the PCNTNW MLID to unload safely, you must first
unload any TSR programs that were loaded after you loaded the MLID.
Action:
Either unload the other TSR program before loading the PCNTNW MLID,
or unload the TSR program before attempting this operation.
PCNTW-DOS-5 PCNTNW MLID could not be unloaded; the operation was
aborted.
Explanation: The PCNTNW MLID attempted to remove the resident PCNTNW
MLID from memory, and failed. A hardware error has probably occurred.
Action:
Run the Ethernet diagnostic.
PCNTW-DOS-6 The adapter did not initialize. PCNTNW did not unload.
Explanation:
The hardware did not initialize correctly. The PCNTNW driver did
not load.
Action: Check the hardware. Make sure that the board's hardware setting matches
its settings in the NET.CFG file.
158
PC Server 325 User's Handbook