IBM PC Server 325, User Handbook Manual

Page: 95 / 288

Working with Internal Drives
If you use the internal SCSI connector and the external SCSI
connector on the system board, both ends of the bus must be
terminated. In addition, if you connect an 8-bit device to the
external connector, you must change the position of the external
SCSI termination jumper (J29). See “System Board Jumpers” on
page 210 for the location and default jumper position of this
jumper.
Refer to the instructions that come with the SCSI device for more
information about termination. Refer to the User's Reference for
additional information about your server's SCSI subsystem.
Installing Internal Drives
Before you begin
Ÿ Read “Electrical Safety” on page 53 and “Handling
Static-Sensitive Devices” on page 54.
Ÿ Read the instructions that come with the internal drive.
Ÿ
Turn off the server.
Ÿ
Disconnect all external cables and power cords, and then
remove the server cover (see “Preparing to Add Options” on
page 55).
1. Determine the location for the drive you want to install.
Chapter 3. Installing Options
81