Item
Data
User 4:
l
Access port: 0/1/3
l
Inner VLAN tag: 12
Procedure
l
The procedure for configuring the VLAN ID extension on MA5616_A is as follows:
1.
Create a VLAN.
huawei(config)#
vlan 100 smart
2.
Set the VLAN attribute to stacking VLAN.
huawei(config)#
vlan attrib 100 stacking
3.
Add an uplink port to the VLAN.
huawei(config)#
port vlan 100 0/0 1
4.
Add service ports to the VLAN.
huawei(config)#
service-port vlan 100 vdsl mode ptm 0/1/2 multi-service
user-encap pppoe
rx-cttr 6 tx-cttr 6
huawei(config)#
service-port vlan 100 vdsl mode ptm 0/1/3 multi-service
user-encap pppoe
rx-cttr 6 tx-cttr 6
5.
Set the inner VLAN tag.
huawei(config)#
display service-port all
{ <cr>|sort-by<K>||<K> }:
Command:
display service-port all
-------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX
STATE
ID ATTR TYPE TYPE
PARA
-------------------------------------------------------------------------
0 100 common vdl 0/1 /2 - - encap pppoe 6 6
up
1 100 common vdl 0/1 /3 - - encap pppoe 6 6
up
-------------------------------------------------------------------------
Total : 2 (Up/Down : 2/0)
huawei(config)#
stacking label service-port 0 11
huawei(config)#
stacking label service-port 1 12
NOTE
In the actual configuration, the index of the traffic stream may vary according to the number
of traffic streams in the system. You only need to ensure that the actual index corresponds to
the inner VLAN tag.
6.
Save the data.
huawei(config)#
save
SmartAX MA5616 Multi-service Access Module
Configuration Guide
9 Configuration Example of Services on the MA5616
Through GE Upstream Transmission
Issue 04 (2011-10-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
458
