The queried program index is 0.
huawei(config)#
display igmp program index 0
{ <cr>||
<K> }:
Command:
display igmp program index
0
---------------------------------------------
Program index :
0
Create mode :
static
Program name :
PROGRAM-0
IP address :
224.1.1.1
VLAN ID :
10
Host attribute :
enable
Log attribute :
enable
Prejoin attribute :
disable
Unsolicited attribute :
disable
Priority :
7
Host IP :
0.0.0.0
Bandwidth(kbps) :
5000
SourceIP :
-
Preview Profile : 1 //
The index of the preview profile bound to the
multicast program is 1.
Numbers of watching :
0
Program Grade :
-
---------------------------------------------
6.2.6 (Optional) Configuring the Program Prejoin
In program prejoin, the MA5616 receives the multicast stream of a program from the upper-
layer multicast router to the uplink port before a user sends a request to join a program. In this
manner, the multicast stream can be directly transmitted from the uplink port to the user port
after the multicast user requests for a program, thus shortening the waiting time of the user for
requesting for the program.
Prerequisites
The program matching mode of the multicast VLAN must be the static configuration mode.
Context
Multicast program prejoin is the same as program request. The MA5616 plays the role of a user
and sends the report packet for receiving in advance the multicast stream from the upper-layer
multicast router to the uplink port.
SmartAX MA5616 Multi-service Access Module
Configuration Guide
6 Configuring the Multicast Service (Multicast VLAN Mode)
Issue 04 (2011-10-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
194
