Hitachi SJ700-004LFU2, Instruction Manual

Page: 332 / 390

ModBus Data Listing
Append
ix
B
B–48
A261 H Frequency upper limit
setting, 2nd motor
R/W Sets a limit on output
frequency less than the
maximum frequency (A004) 224Fh 08783 0, 50 to
40000
0.01 Hz
A261 L R/W 2250h 08784
A062 H Frequency lower limit
setting
R/W Sets a limit on output
frequency greater than zero 1251h 04689 0, 50 to
40000
0.01 Hz
A062 L R/W 1252h 04690
A262 H Frequency lower limit
setting, 2nd motor
R/W Sets a limit on output
frequency greater than zero 2251h 08785 0, 50 to
40000
0.01 Hz
A262 L R/W 2252h 08786
— — (Reserved) — — 2253h
to
226Eh
08787
to
08814
— —
A063 H Jump (center) frequency
setting
R/W Up to 3 output frequencies
can be defined for the output
to jump past to avoid motor
resonances (center freq.) 1253h 04691 0 to 40000 0.01 Hz
A063 L R/W 1254h 04692
A064 — Jump (hysteresis)
frequency width setting
R/W Defines the distance from the
center frequency at which the
jump occurs 1255h 04693 0 to 1000 0.01 Hz
A065 H Jump (center) frequency
setting
R/W Up to 3 output frequencies
can be defined for the output
to jump past to avoid motor
resonances (center freq.) 1256h 04694 0 to 40000 0.01 Hz
A065 L R/W 1257h 04695
A066 — Jump (hysteresis)
frequency width setting
R/W Defines the distance from the
center frequency at which the
jump occurs 1258h 04696 0 to 1000 0.01 Hz
A067 H Jump (center) frequency
setting
R/W Up to 3 output frequencies
can be defined for the output
to jump past to avoid motor
resonances (center freq.) 1259h 04697 0 to 40000 0.01 Hz
A067 L R/W 125Ah 04698
A068 — Jump (hysteresis)
frequency width setting
R/W Defines the distance from the
center frequency at which the
jump occurs 125Bh 04699 0 to 1000 0.01 Hz
A069 H Acceleration stop
frequency setting
R/W 0.00 to 400.0 (Hz) 125Ch 04700 0 to 40000 0.01 Hz
A069 L R/W 125Dh 04701
A070 — Acceleration stop time
frequency setting
R/W 0.0 to 60.0 (seconds) 125Eh 04702 0 to 600 0.1 sec.
A071 — PID Function Enable R/W 00..PID operation OFF
01..PID operation ON
02..PID operation ON with
inverted output 125Fh 04703 0, 1, 2 —
A072 — PID proportional gain R/W 0.2 to 5.0 1260h 0474 2 to 50 0.2
A073 — PID integral time constant R/W 0.0 to 999.9, 1000. to 3600.
(seconds) 1261h 04705 0 to 36000 0.1 sec.
A074 — PID derivative gain R/W 0.0 to 99.99, 100.0 (seconds) 1262h 04706 0 to 10000 0.01 sec.
A075 — PV scale conversion R/W 0.01 to 99.99, 100.0
(seconds) 1263h 04707 1 to 9999 0.01
Holding Registers, “A” Group Standard Functions
Func. Code Name R/W Description
Network Data
Register
Range Res.
hex dec.