Hitachi SJ700-004LFU2, Instruction Manual

Page: 147 / 390

SJ700
2
Inverter
Configur
ing Dr
iv
e
P
a
ra
met
e
rs
3–63
occurred, the inverter and motor will enter free-run stop (coasting) operation. In some applica-
tions, the motor and load will still be coasting when the inverter returns to normal Run Mode
operation. For that situation, you can configure the inverter output (C103=00) to resume opera-
tion from 0 Hz and accelerate normally. Or, you can configure the inverter (C103=01) to
resume operation from the current speed of the motor (
frequency matching )—often used in
applications such as HVAC.
Output Terminal
Signal Functions
Func.
Code
Name/
Description
Keypad
Range and Settings
Defaults Run
Mode
Edit
Lo Hi
SRW OPE
xFE2
(EU)
xFU2
(USA)
xFF2
(Jpn)
C102 Reset mode selection ON
00
Cancel trip state, stop inverter output, reset
CPU; clear position counter at ON transition 00 00 00
✔ ✔
Determines response to
Reset input [RST] OFF
0 1
Cancel trip state, stop inverter output, reset
CPU; clear position counter at OFF transi-
tion
TRP
02
Cancel trip state and clear position counter;
no effect if a trip does not exist
EXT
03
Cancel trip state but does not clear position
counter; no effect if a trip does not exist
C103 Restart mode after reset ZST
00
Restart at 0 Hz 00 00 00
✘ ✔
fST
0 1
Resume operation after frequency matching
FIX
02
Restart with active matching frequency
C105 FM gain adjustment 50. to 200. (%) 100. 100. 100.
✘ ✔
C106 AM gain adjustment 50. to 200. (%) 100. 100. 100.
✘ ✔
C107 AMI gain adjustment 50. to 200. (%) 100. 100. 100.
✔ ✔
C109 AM bias adjustment 0. to 100. (%) 0. 0. 0.
✔ ✔
C110 AMI bias adjustment 0. to 100. (%) 20. 20. 20.
✔ ✔
C111 Overload setting (2) 0.00 x rated current to 1.80 x rated current
(A) Rated current for
inverter
✘ ✔
Func.
Code
Name/
Description
Keypad
Range and Settings
Defaults
Run
Mode
Edit
Lo Hi
SRW OPE
FEF2
FE2
(EU)
FUF2
FU2
(USA)
FF2
F2
(Jpn)
C130 Terminal [11] ON-delay time — — 0.0 to 100.0 (seconds) 0.0 0.0 0.0
✘ ✔
C131 Terminal [11] OFF-delay time — — 0.0 to 100.0 (seconds) 0.0 0.0 0.0
✘ ✔
C132 Terminal [12] ON-delay time — — 0.0 to 100.0 (seconds) 0.0 0.0 0.0
✘ ✔
C133 Terminal [12] OFF-delay time — — 0.0 to 100.0 (seconds) 0.0 0.0 0.0
✘ ✔
C134 Terminal [13] ON-delay time — — 0.0 to 100.0 (seconds) 0.0 0.0 0.0
✘ ✔
C135 Terminal [13] OFF-delay time — — 0.0 to 100.0 (seconds) 0.0 0.0 0.0
✘ ✔
C136 Terminal [14] ON-delay time — — 0.0 to 100.0 (seconds) 0.0 0.0 0.0
✘ ✔
C137 Terminal [14] OFF-delay time — — 0.0 to 100.0 (seconds) 0.0 0.0 0.0
✘ ✔
C138 Terminal [15] ON-delay time — — 0.0 to 100.0 (seconds) 0.0 0.0 0.0
✘ ✔