Hitachi SJ700-004LFU2, Instruction Manual

Page: 347 / 390

SJ700
2
Inverter
Appendix B
B–63
C085 — Thermistor input tuning R/W 0.0 to 999.9., 1000 1459h 05209
— (Reserved) — — 145Ah
to
145Eh
05210
to
05214
— —
C091 — Debug mode enable R 00 . No display
01 . Display 145Fh 05215 0, 1 —
— — (Reserved) — — 1460h
to
1468h
05216
to
05224
— —
C101 — Up/Down memory mode
selection
R/W 00 . Clear last freq. (return to
default freq. F001)
01 . Keep last frequency
adjusted by UP/DWN 1469h 05225 0, 1 —
C102 — Reset mode selection R/W 00 . Cancel trip state, stop
inverter output, reset CPU;
clear position counter at ON
transition
01 . Cancel trip state, stop
inverter output, reset CPU;
clear position counter at OFF
transition
02 . Cancel trip state and
clear position counter; no
effect if a trip does not exist
03 . Cancel trip state but does
not clear position counter; no
effect if a trip does not exist 146Ah 05226 0 to 3 —
C103 — Restart mode after reset R/W 00 . Restart at 0 Hz
01 . Resume operation after
frequency matching
02 . Restart with active
matching frequency 146Bh 05227
— (Reserved) — — 146Ch 05228 — —
C105 — FM gain adjustment R/W 50. to 200. (%) 146Dh 05229 50 to 200 1 %
C106 — AM gain adjustment R/W 50. to 200. (%) 146Eh 05230 50 to 200 1 %
C107 — AMI gain adjustment R/W 50. to 200. (%) 146Fh 05231 50 to 200 1 %
— (Reserved) — — 1470h 05232 — —
C109 — AM bias adjustment R/W 0. to 100. (%) 1471h 05233 0 to 100 1 %
C110 — AMI bias adjustment R/W 0. to 100. (%) 1472h 05234 0 to 100 1 %
C111 — Overload setting (2) R/W 0.00 x rated current to
2.00 x rated current (A) 1473h 05235 0 to 1800 0.1 %
— (Reserved) — — 1474h
to
147Ch
05236
to
05244
— —
C121 — [O] input zero calibration R/W 0. to 9999., 1000 to 6553
(10000 to 65530) 147Dh 05245 0 to 65530 1
C122 — [OI] input zero calibration R/W 0. to 9999., 1000 to 6553
(10000 to 65530) 147Eh 05246 0 to 65530 1
Holding Registers, “C” Group Intelligent Terminal Functions
Func. Code Name R/W Description
Network Data
Register
Range Res.
hex dec.