Hioki MR8827 Instruction Manual Download Page 83

Page: 83 / 436

To Open the File Screen

The selected file is indicated

by a flashing cursor.

Use the

Right/left CURSOR

keys

to move between folder levels.

Use the

Up/down CURSOR

keys to select files.
Read-only files and folders

are shown in blue.

These files and folders cannot

be renamed or deleted.

Storage Media information

Shows information about the selected storage media.

Count:

Displays the number of files in the selected folder.

Dir Count: Shows the number of folders in the selected folder.

Count:

Shows the number of files and folders that can be

created in the selected folder level.

Indicated the order in which

the files are displayed.

: Ascending order

: Descending order

Press this key.

Information is displayed for

the selected file.

To Change Media

Verify that storage media is inserted.

Refer to “2.3 Prepare Storage Media” (p. 40).

Select

[Change Media]

and select a storage media type.

The files on the selected storage media will be displayed in the file list.

When Media is not displayed and you cannot perform any

operations n the file screen, choose a setting other than

[Mass storage HDD]

[Mass storage CF]

for

[USB Set]

Operations available from the File screen

Format storage media

(p. 42)

Load data

(p. 93)

Save/load an auto-settings file

(p. 96)

Manage files

(p. 81)

•

Save data (p. 98)

•

Create new folders (p. 100)

•

Copy files (p. 104)

•

Sort files (p. 102)

•

Delete files (p. 101)

•

Rename files (p. 103)

•

Print the File List (p. 105)

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands