Hioki MR8827, Instruction Manual

Page: 307 / 436

302
Editor Command Details
Eraser
Erase unwanted sections. Move the mark with the cursor keys to erase parts of the
image.
Instructions
1
Press the F key for [Eraser] .
2
Using the cursor keys, move the mark to the origin of the area to be erased.
Press
[Speed up]
to accelerate the movement of the mark.
3
Press the F key for [Set] .
Now you can erase figures by moving the eraser. Press the F key for [Cancel] and
you can move the eraser without erasing figures.
4
Move the mark in the [Set] state to erase the parts of figures you do not
need.
5
Press the [Exit Erase] key to exit erase mode.
Clear all
Clears the entire editor screen.
Press the F key for [Clear all] .
The editor screen is cleared.
Clear select area
Clears a specified rectangular area of the editor screen.
Instructions
1
Press the F key for [Clear select area] .
2
Using the cursor keys, move the mark to the origin of the area to be erased.
Press [Speed up] to accelerate the movement of the mark.
3
Press the [Set] function key to set the position as the origin.
4
Move the mark.
A rectangle is drawn between the origin and the mark.
5
Press [Set] again.
The area inside the rectangle is erased. Press [Cancel] and the position of the origin
is canceled.
6
Press the F key for [Exit Area Clear] to exit from the area clear mode.