Hioki MR8827, Instruction Manual

Page: 189 / 436

184
Register the Waveform in the U8793 ArbitraryWaveform Generator Unit
Register From Measured Data
1
Select [Register..from measurement data] using F keys
2
2
3
4
5
6
2
Select the waveform to be registered using F keys.
Analog Ch Registers the waveform of the measured analog channel.
Wave Calc. Z Registers the waveforms with waveform calculation result.
3
Select the waveform channels to register.
Analog waveform
Ch1 to Ch32
Waveform calculations
Z1 to Z16
4
Set the data count to be registered.
Whole waveforms Registers the whole wave.*
A-B waveforms Registers the waveforms between AB cursors.*
Tenkey input Randomly sets data lead position and data count in the numeric keypad input.
* Data count more than 250,000 (maximum registerable data count) cannot be registered.
5
Set the conversion ratio.
Amplify or attenuate a voltage value of the measured data to register it.
0.001 times to 100 times
6
Enter a data name.
Register as an arbitrary waveform data in the U8793 memory.
Enter a [Name] .
When a data name is not entered, the data will be registered as [NONAME] .