Hioki MR8827 Instruction Manual Download Page 90

Page: 90 / 436

Save Data

Set the save method for when the storage media

runs out of space.

Move the cursor to

[Save method]

Normal

Save

Automatic saving stops when the storage

media is full.

Delete

Save

Old files are deleted and automatic saving

is continues when the storage media is full.

(Waveform files only.)

When

[LAN]

is set as the save destination, this

setting is ignored and the save method becomes

[Normal Save]

Confirm the measurement configuration then start

measurement.

Press the

START

key.

After the data is acquired, the screen image is saved

automatically to the specified storage media.

•

Maximum number of files per folder

The combined maximum for files and folders created in one folder is 5,000.

Refer to “Auto-save Operations (When Setting the Save Destination to Storage Media)” (p. 86).

•

[Preparing files]

display

Sometimes

[Preparing files

] is displayed after measurement starts. This indicates that the instrument

is checking the status of the destination where the file will be saved. The more the files exist in the

destination folder, the longer the preparation takes.

When printing is attempted simultaneously with saving, the printing may override the saving and

[Preparing files]

may be displayed longer.

To clear the Auto Save dialog box

Press the

SAVE

key to toggle dialog box display.

Save/Load Data and Manage Files

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands