Hioki MR8827 Instruction Manual Download Page 327

Page: 327 / 436

322

Access Files on the Instrument From a PC (Using FTP)

16.3

Access Files on the Instrument From a PC

(Using FTP)

By using a PC FTP client, you can transfer files from the instrument's storage media to the PC and

perform other file operations.

• This instrument is equipped with an FTP (File-Transfer-Protocol, RFC959 compliant) server.

• You can use IE (Internet Explorer) or other popular FTP clients.

• The FTP server of the instrument allows only one connection at a time. More than one PC cannot

access the server simultaneously.

• If no command is sent from a PC for more than one minute after connecting to the FTP server, the

FTP may disconnect the PC. If this occurs, reconnect via your FTP client.

• FTP operation will be interrupted when measurement is started.

• Before inserting or removing a CF card or USB memory stick, terminate the FTP connection.

•

Do not perform file operations while FTP is being used.

•

With IE, the refresh date of files may not match those of the main unit.

•

With IE, temporary internet files may retain data from a previous access, so previous data may be

obtained instead of the newest data.

To use FTP, the instrument must be properly set up and connected via LAN cable to the PC.

Refer to “16.1.1 LAN Settings on the Instrument” (p. 310) or “16.1.2 Connect the Instrument to a PC With a LAN

Cable” (p. 313).

Be careful when moving files by FTP, as some FTP client/browser programs may delete all selected

files or folders from the source if you cancel a transfer before completion. Rather than moving files in

one step, we recommend copying (downloading) and then manually deleting from the source.

Things to Check Before Using FTP

Relationship Between

Storage Media and

Directories

Each of the various types of storage media appears as a directory on

the FTP server.

/CF ................... CF card

/HDD ................ Built-in drive

/RAM ................ Internal memory

/USB1 .............. USB memory stick

/STORAGE .......Storage memory

Limitations

During measurement you cannot access files.

Even when the built-in drive is SSD, it is recognized as HDD.

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands