Hioki MR8827 Instruction Manual Download Page 328

Page: 328 / 436

323

Access Files on the Instrument From a PC (Using FTP)

16.3.1

FTP Settings at the Instrument

Procedure

Press the

SYSTEM

key to open the System screen, and then select the

[Interface]

sheet.

Set the access restrictions.

Move the cursor to

[Access Ctrl].

Read/

Write

File deletion and renaming are permitted.

Read-

Only

Only file reading is permitted. This prevents files from

being deleted or changed from outside the instrument.

Choose authorization settings.

Move the cursor to

[Authorization].

Off

Web server authentication not used. (Default setting)

Web server authentication used.

When

[On]

is selected

Set up a user name and password.

Move the cursor to

[User Name]

and

[Password]

and enter

suitable information.

Refer to “8.1.3 Alphanumeric Input” (p. 143) or “Authorization User

Name and Password” (p. 311).

The user name and password for

authentication are the same for

the Internet browser and for FTP.

Apply the settings.

Move the cursor to

[Reset].

Select

[Reflect Set].

The “LAN was reconnected” message will appear at the

bottom of the screen.

Connect to a PC

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands