Hioki MR8827 Instruction Manual Download Page 330

Page: 330 / 436

325

Access Files on the Instrument From a PC (Using FTP)

16.3.3 Use FTP for File Operations

To Download Files

Select the file to download from the folder list and drag and drop* it on the download destination (the

desktop or a folder outside the IE window).

* Click the file and hold the button down. Move the mouse pointer to the target destination, and then release the

button

On PC monitor

Drag and Drop

Minutes and seconds may not be reflected on the time stamp (date) of the file.

To Delete or Rename Files

Right click a file in the FTP folder list, and select

[Delete]

[Rename]

from the pull-down menu.

Right click

Click

Files cannot be uploaded to the instrument from the PC. To copy a file to the built-in drive of the

instrument, use a USB memory stick or CF card.

Connect to a PC

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands