Hioki MR8827 Instruction Manual Download Page 265

Page: 265 / 436

260

FFT Analysis Condition Settings

13.3.10

Set the Display Range of the Vertical Axis (Scaling)

The display range of the vertical (Y) axis can be set to automatically fir analysis results and can be freely

expanded and compressed.

Procedure

Press the

STATUS

key to open the Status screen, and then select the

[Status]

sheet.

Select automatic or manual scaling of the Y-axis

display.

Move the cursor to the

[Scale]

column of the Analysis No.

you want to set.

Auto

Scaling of the vertical (Y) axis is automatically set

according to analysis results.

(Default setting)

Manual

Scaling of the vertical (Y) axis can be set as desired,

to suit the measurement.

This is useful for magnifying or reducing the

displayed amplitude, and for shifting the displayed

waveform up or down.

When

[Manual]

is selected

Set the upper and lower limits.

Move the cursor to

[Lower]

[Upper]

Set the upper and lower limits to display the analysis

results.

Setting range: −9.9999E+29 to +9.9999E+29

(with exponent from E−29 to E+29)

Refer to “8.1.3 Alphanumeric Input” (p. 143).

To copy settings to another calculation No.

Refer to “8.9 Copy Settings to Other Channels (Copy Function)” (p. 163).

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands