Hioki MR8827 Instruction Manual Download Page 110

Page: 110 / 436

105

Manage Files

5.5.8

Print the File List

The file list of the File screen can be printed. Details for all displayed items in the file list will print.

Only folder names are printed for folders. Information on the contents of folders is not printed.

Before printing, make sure the recording paper is loaded correctly.

Refer to “2.4 Load Instrument With Recording Paper (When Model U8350 Printer Unit is installed)” (p. 43).

Procedure

Press the

FILE

key to open the screen → File screen

To change the storage media: (p. 78)

Press the

PRINT

key.

The file list will print.

To cancel printing before it has finished:

Press the

STOP

key.

The file list will print as shown below.

Print Example

0001AUTO MEM 14-06-16 00:00:00 21kB

[ ]

0002AUTO MEM 14-06-16 00:01:00 21kB

[ ]

File Name Type

Date

Size

Attribute

No.

File attributes are represented by single letters according to the table below.

For Loading only

Hidden File

System File

Folder

Archive (Backup)

Save/Load Data and Manage Files

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands