Hioki MR8827, Instruction Manual

Page: 101 / 436

96
Automatically Load Settings (Auto-setup Function)
5.4 Automatically Load Settings (Auto-setup
Function)
When settings are saved as described below, they can be loaded automatically at power-up.
The auto-setup function is compatible with CF cards only.
If the STARTUP file is on the built-in drive, USB memory stick, or RAM (internal memory), it will not be
referenced. Always create the STARTUP file on a CF card.
Procedure
Press the FILE key to open the File screen. To change the storage media: (p. 78)
1
Select [Change Media] and specify the CF card.
3
4
5
2
If a folder named “HIOKI_MR8827” exists in the root directory
(topmost folder on media), move the cursor to that folder.
If the folder does not exist, go to the root directory. (A folder
named “HIOKI_MR8827” will be created automatically and used
as the save location.)
3
Select [Save] and set [Save Type] to [Setting] .
4
Move the cursor to [Save Name] , and enter “STARTUP.”
Refer to “8.1.3 Alphanumeric Input” (p. 143).
5
Move the cursor to [Same Name] , and select [Overwrite] .
6
Select [Exec] .
To cancel setting, select [Cancel] .
The next time the instrument is turned on, the settings will be
loaded automatically.