Repairs/Adjustments
07/23/2020
GBC StreamWire
4-78
REP 3.15.7 Pushover Motor Assy Replacement M12
PARTS LIST ON PL 5.13
Use this procedure to remove and install the Expanding T Pushover
Motor Subassembly.
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
Removal Procedure
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Do REP 3.15
Element Transfer Module Replacement
Element Transfer Module.
Element Pushover Encoder Sensor Replacement
to remove the Pushover Encoder Sensor and the Encoder
Sensor mounting bracket.
Horizontal Pushover Cam Replacement
the Horizontal Pushover Cam on the drive side.
6. Remove the M4 Flat Head Screws securing the top of the Pushover
Motor Bracket Assembly.
7. Remove the M3 Screw securing the side of the Pushover Motor
Bracket Assembly.
8. Carefully remove the Pushover Motor Bracket Assembly from the
frame.
9. Remove the flanged bearing from the drive shaft and remove the
Timing Belt from the Motor Drive Pulley. Set the parts aside.
Installation Procedure
1. Install the flanged bearing into the opening on the new Pushover
Motor Bracket Assembly.
2. Loosely install the Timing Belt around the Timing Pulley.
3. Place the Wave Spring onto the drive shaft.
4. Slide the Flanged Bearing and the Motor Bracket Assembly onto
the Drive shaft, and slide the new Motor Bracket Assembly into
place.
5. Adjust the Timing Belt to ensure it is seated properly on the Motor
and Drive shaft timing pulleys.
6. Secure the Pushover Motor Bracket Assembly using (2) M4 Flat
Head Screws on the top and (1) M3 Screw on the side.
Horizontal Pushover Cam Replacement
the Horizontal Pushover Cam.
Element Pushover Encoder Sensor Replacement
to install the Pushover Encoder Sensor and the Encoder
Sensor mounting bracket.
Element Transfer Module Replacement
Element Transfer Module.
10. Connect the Power Cord.
11. Power ON the eWire.
Summary of Contents for StreamWire
