![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657349.webp)
General Procedures and Information
07/23/2020
GBC StreamWire
6-12
GP 6.3.2
SOLENOIDS Procedure
The Solenoid feature allows you to test the operation of each of the
solenoids in the machine.
NOTE: Door needs to be closed or Interlock Cheater inserted to do
this.
Enter Service Mode by following the procedure described in
Press the down arrow until the return symbol is next to the words
SOLENOIDS. Press OK/ENTER.
SOLENOIDS
*
MOTORS
Press the down arrow to scroll through the solenoid options.
L1 L2 L3 L4 L5
*
L6 L7 L8 L9
Press the OK/ENTER button to turn the selected solenoid on.
You should hear the Solenoid click, and see the Solenoid actuate if it is
visible.
Repeat as needed to check the other Solenoids.
If a Solenoid does not operate do
Inspection, and repeat steps 1-5.
Refer to
for additional info regarding locating and testing the
various Solenoids in the eWire.
Select BACK to return to the Service Mode menu
Select EXIT to return to the top level screen.
GP 6.3.3
MOTORS Procedure
The Motors feature allows you to test the operation of selected Motors
throughout the eWire. Do the following to check the Motors.
NOTE: Door needs to be closed or Interlock Cheater inserted to do
this.
Follow the procedure described in
Press the down arrow until the return symbol is next to the word
MOTORS.
SOLENOIDS
*
MOTORS
Press the OK/ENTER button to display the display the first MOTORS
screen.
M1 M2 M3 M4 M5
*
M6 M7 M8 M9
BACK
Press the down arrow to scroll through the motors. The selected motor
will flash on the LCD screen.
Press the OK/ENTER button to turn the selected motor on.
You should hear the motor running. The motor will run continuously until it
is turned off.
Press the OK/ENTER button again to turn the selected motor off. Repeat
as needed to check the other Motors.
Refer to
GP 6.5
for additional info regarding motor checks, and for help
locating the appropriate motor within the eWire.
Press the up or down arrow to highlight the BACK option.
Press the OK/ENTER button to display the SOLENOIDS / MOTORS
menu.
Press the up arrow to display the EXIT option.
Press OK/ENTER to return to the top level screen.
Summary of Contents for StreamWire
