![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657362.webp)
GBC StreamWire
07/23/2020
General Procedures and Information
6-25
3. Replace the Sensor with a new one (alternatively, swap the sensor in
the faulty position with a sensor from a different good position to
check if it is a bad sensor).
Replacing the sensor corrects the issue
Yes
- Install the new sensor and return to normal operation
No
-
Go to Step 4
4. Visually inspect the Cable from the sensor all the way to the Control
Board (PL 5.27). If the Cable is damaged, replace the Cable. Refer to
to identify all cables used with the sensor.
Sensor cable looks okay
Yes
- Go to Step 5
No
-
Go to Step 6
5. Do
Procedure
to Re-flash the
firmware for the eWire.
Re-flashing firmware clears the fault
Yes
- Resume normal operation
No
- Go to Step 6
6. Replace the Sensor Cable(s). Remove the faulty cable from the
sensor by releasing the required cable clamps. Replace with a new
cable. Refer to GP 6.22 to identify all required cables.
Replacing the sensor cable(s) corrects the issue
Yes
- Resume normal operation
No
- Go to Step 7
7. Do REP 11.1 or REP 11.2 to replace the Main Control Board (PL
5.27).
This clears the fault
Yes
- Resume normal operation
No
- Escalate to second level
GP 6.4.2
Check S6-S10, S12, S13, and S15
Use the information in this section to locate the appropriate sensor(s) on
the eWire. Once you have located the sensor, follow
the function of the sensor. If the sensor does not operate as expected,
follow the troubleshooting steps located in this section to fix the faulty
sensor.
Locate Sensors S12, S13, and S15:
•
Raise the Top Cover.
•
Locate the Alignment Sensor Board openings on the Upper
Bypass panel frame.
•
The sensors are mounted on a common Board, but can be
checked individually.
•
Sensors S11 and S14 are located on the Alignment Sensor
Board, but are not used with eWire.
Sensors S12, S13, and S15 are located on the Alignment Sensor Board
Summary of Contents for StreamWire
