![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657114.webp)
GBC StreamWire
7/23/2020
Repairs/Adjustments
4-17
REP 2.5 Idler Roller Replacement, Steering Module
PARTS LIST ON PL 5.5
Use this procedure to remove and install the Idler Rollers on the following
Nips:
N3 and N4
Removal Procedure
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Raise the Upper Bypass Panel
4. Remove the Extension Spring (2) by unhooking the spring ends
from the hooks on the mounting bracket.
5. Slide the Idler Roller Assembly out of the Steering Module by lifting
the bearings out of the bearing mount brackets
Installation Procedure
1. Place the new Steering Idler Roller Assembly into the Bearing
Mount Brackets on the Steering Module.
2. Make sure the flat faces of the Bearings align with the slot on the
Bearing Mount Brackets.
3. Rollers are non-directional so it does not matter which end goes in
which bracket.
4. After the assembly is in place, gently pull the assembly outward and
release to ensure it moves freely in the housing.
5. Place the Extension Spring (2) over the Bearing hub (2).
6. Place the hooks on the ends of the Extension Springs (2) into the
mounting holes on the Bearing Mount Brackets.
7. Lower the Upper Bypass Panel
8. Connect the Power Cord.
9. Power ON the eWire.
Summary of Contents for StreamWire
