Repairs/Adjustments
07/23/2020
GBC StreamWire
4-194
ADJ 1.12 Caster Height Adjustment
Use the following procedure to adjust the height of the eWire.
Adjustment Procedure
1) Perform REP 1.5 to remove the Back Cover to gain access to the
rear casters.
2) The front casters can be accessed by opening the Element Feeder
and the Book Drawer doors. To reach the caster you must pull out
the drawer completely and access the caster behind it. Do not pull
out both drawers at the same time, this will block access to both
casters.
3) Ensure that the paper path exit guide on the upstream device is
level horizontally with the entrance guide of the eWire. The paper
path center line of the upstream exit guide should be vertically
aligned with the center of the eWire entrance. Adjust the casters of
eWire as necessary to achieve this. A piece of thick paper
(200gsm or heavier) can be fed through the upstream device into
the eWire for a better visual of the height alignment.
4) Loosen the M12 Jam Nut on the caster or casters that require
adjustment. Do not remove the Jam Nut completely.
5) To adjust the height of the caster, use a 7mm wrench. To raise the
eWire, rotate the caster nut clockwise. To lower the eWire, rotate
the caster nut counter clockwise.
6) After making the required adjustments, check that the top cover of
the eWire is level in the paper path direction and the downstream
end of the eWire matches the level of the upstream end front to
back (inboard/outboard). If it is not level, readjust the casters.
7) After the eWire is at the desired height and level, tighten the jam
nuts to lock the height.
Summary of Contents for StreamWire
