General Procedures and Information
07/23/2020
GBC StreamWire
6-60
GP 6.6.5
Check L9 Book Eject Solenoid
To access Solenoid L9:
•
Raise the Top Cover by releasing the latch.
•
Solenoid L9 is located inside the Closer Module.
•
Insert a cheater into the Top Cover Interlock.
WARNING
Moving Parts, keep hands clear of moving parts when
the Interlock Cheater is inserted.
See Section 0, page
vii for other languages.
Solenoid L9.
•
The Pusher Plate should move out when solenoid L9 is
activated.
Pusher Plate moves out when L9 is activated.
Yes
- Return to the procedure that directed you here ;
No
- Go to Step 2
2. Follow REP 6.1 to remove the Cable Access Cover. Check that the
Flat Mylar Closer Cable is plugged in and properly seated in its
housing as shown.
Cable is plugged in and properly seated
Yes
- Go to Step 3;
No
- Plug in the cable and cycle the Element Feeder Door interlock.
The Pusher Plate moves out when L9 is activated.
Yes
- Reinstall the Cable Cover and return to the procedure that
directed you here;
No
- Go to Step 3.
3. Do REP 6.4 to remove the Closer Motor. Make sure that both ends of
the solenoid wire are connected securely at the header and at the
Main Control Board (PL 5.27). Do REP 1.5 to remove the Rear Cover
to gain access to the connector at the Control Board. Refer to
All the connectors are securely connected.
Yes
- Go to Step 4;
No
- Make the connection then reinstall the Closer Module.
The Pusher Plate moves out when L9 is activated.
Yes
- Reinstall the Closer Motor and Cable Cover and return to
the procedure that directed you here;
No
- Go to Step 4
Summary of Contents for StreamWire
