GBC StreamWire, Service Manual, Page: 400 / 455

GBC StreamWire 07/23/2020 General Procedures and Information
6-63
7. Secure the spool by using the spool retainer. Turn the knob clockwise
to thread the cap into the spindle until spool is secure. Do not over
tighten
8. Gently remove the flat cardboard spacer that is used to secure the
wire during shipment. Before removing the spacer, check that the
flexible magnet is installed to secure the wire.
9. Pull the wire and paper away from the spool and hold them both in
one hand. With your free hand install the wire shield.
10. While still holding the carrier paper, use the magnetic catch to hold
the wire.
11. Lift the metal guide of the shield and slide the carrier paper between it
and the lower bars.