Service Manual
07/23/2020
GBC StreamWire
ii
Quick Start
Below is an excerpt from page 1-3. These steps should be performed at
the start of every service call and will direct you through the use of the
manual.
At the start of every service call, you should perform the following:
•
If called for a problem, determine the exact nature of the
service complaint. Determine the paper type and quality,
especially as it relates to curl. Determine the size and color of
twin loop wire being used.
•
Identify if any media changes correlate with the emergence of
the customer issue.
•
Determine if the problem occurs with all element sizes or only
specific sizes. If multiple sizes have not been used, try running
the eWire using a different wire size.
•
Do GP 6.2.7 to note the total machine bind and sheet cycles.
•
If possible, run a bind cycle and evaluate the quality of the
bound book. Refer to Section 3 of this manual for additional
information regarding the book quality.
•
Do GP 6.8 and GP 6.7 to replace the supply spool and re-
evaluate the performance using the new supply spool.
•
Determine the date of the last preventative maintenance
performed on the system. Perform preventative maintenance
as indicated on page 1-5.
•
Vacuum the paper path, element feeder, and book stacking
areas. Visually inspect the eWire and clear any scraps/debris.
•
Save the system settings to a data file.
•
Download a log file to USB. Note any error codes, especially if
they occur repeatedly.
SYSTEM CHECKS
Purpose
Direct repair activity for problems found in Initial Action.
PROCEDURE
1. Select the appropriate condition from the list below and perform
the directed service actions.
•
Replace any obviously broken parts.
•
If there is a Book Quality problem but no Fault Codes or other
obvious problems, go to Section 3.
•
If there is a Fault Code, go to Section 2 Table of Contents.
Locate and perform the RAP associated with the code.
•
If there is an Operator Message that will not clear, go to
Section 2 Table of Contents. Locate and perform the steps in
the OPERATOR MESSAGE RAP associated with the
Operator Message.
•
If the problem is not repeatable, operate the eWire in the
same job conditions the customer used and recheck for a
problem in the categories listed here.
•
If the problem is still not reproduced, examine the Machine
Service Log and note any repeating faults. Refer to the RAP
for those faults in Section 2 to check if the RAP relates to the
customer problem. If so, perform the RAP.
•
If general problems occur that are not related to any fault
code, repeat the steps in install section.
•
If the problem is not resolved after 2 hours, escalate to Canon
2
nd
level support.
•
If none of the above situations apply, go to EVERY CALL
ACTIVITIES on page 1-4.
Verify that the problem is corrected and go to EVERY CALL ACTIVITIES
on page 1-4.
Summary of Contents for StreamWire
