Repairs/Adjustments
07/23/2020
GBC StreamWire
4-60
Installation Procedure
1. Assemble the new Element Sprocket Nose Assembly onto the
Element Feeder Drawer as shown. Ensure that the sprocket is
seated on the pin.
2. Attach the remaining piece of the Element Sprocket Nose Assembly
and reverse the steps in the Removal Procedure.
Note:
The M3 Set
Screw on the Sprocket Feed Shaft must align with the flat on the
stepper motor shaft.
3. Verify that the sprocket moves when turning the Element Sprocket
Knob. If the sprocket does not turn, reseat the sprocket on the pin
as shown in Step 1.
4. Connect the Power Cord.
5. Power ON the eWire.
REP 3.13 Element Engagement Guide Replacement
PARTS LIST ON PL 5.9
Use this procedure to remove and install the Element Engagement Guide
Assembly.
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
Removal Procedure
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Open the Front Door and Slide the Element Feeder out.
4. Remove the M4 Screws (4) securing the Element Engagement
Guide Assembly to the Element Feeder.
Summary of Contents for StreamWire
