![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657122.webp)
GBC StreamWire
7/23/2020
Repairs/Adjustments
4-25
REP 2.14 Skew Measurement Sensor Replacement, S6-S10
PARTS LIST ON PL 3.7
Use the following procedures to remove and install the Skew Sensors,
S6-S10. The Skew Sensors are located on the Skew Sensor PCB
(7715692).
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Do REP 1.1
4. Locate the Skew Sensor PCB on the Steering Module
5. Disconnect the Connector from the PCB.
6. Release the Skew Sensor PCB by removing the M3 Nuts (4)
7. Remove the old Skew Sensor PCB from the Upper Bypass.
Installation Procedure
1. Place the new Skew Sensor PCB onto the Upper Bypass by
aligning it with the M3 studs. Ensure that S6 is oriented at the rear
of the machine and S10 is oriented at the front of the machine.
2. Tighten the M3 Nuts to secure the PCB.
3. Connect the Sensor Cable to the PCB.
5. Connect the Power Cord.
6. Power ON the eWire.
Summary of Contents for StreamWire
