![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657361.webp)
General Procedures and Information
07/23/2020
GBC StreamWire
6-24
Locate sensors S2 and S3:
•
Raise the Top Cover and the Lower Bypass panel.
•
If necessary, manually slide the closer assembly all the way
to the right of the machine.
•
Sensors S2 and S3 can be manually blocked by using a
piece of paper or other solid object.
Sensor S2 is located on the lower bypass panel. Sensor S3 is located
on the Deflector Module (PL 5.16).
Locate sensors S43 and S45:
•
Slide the book drawer all the way out of the machine.
•
Remove any books or paper from the book drawer tray.
•
Sensors can be manually blocked using a piece of paper or
other object.
Sensors S43 and S45 are on the Book Drawer (PL 5.23)
Check Sensors Procedure (S1, S2, S3, S4, S5, S16, S43, and S45):
. Check to make sure the sensor
shows “0” on the LCD when uncovered and “1” when covered.
If the sensor shows “1” when uncovered, clean the sensor. Also
check if there is any obstruction in the sensor window.
All sensors show “0” when uncovered and “1” when covered
Yes
- Return to the RTP that directed you here.
No
- Go to Step 2
2. Make sure the sensor wire is connected securely at the Sensor and at
the Main Control Board (PL 5.27). Do REP 1.5 to remove the Rear
Cover to gain access to the connector at the Control Board. Refer to
and Section 7 for additional info regarding the connector
locations.
All the connections are made securely
Yes
- Go to Step 3
No
- Make the connection and repeat Step 1.
S2
S3
Summary of Contents for StreamWire
