![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657293.webp)
Repairs/Adjustments
07/23/2020
GBC StreamWire
4-196
4) The LCD will now show “JOG POSITION”. The expanding T can now
be moved using the up and down arrow keys to move the element
closer to the holder. Move the element closer to the holder so that it is
close to the holder grooves. View the element at the holder grooves
as indicated by the arrow in the image below. The deflector can be
removed per REP 5.1 to make viewing the element on the holder
easier. The holder solenoids will keep open for 2 minutes and then
turn off to prevent overheating.
5) Make a note of the direction the element will need to move to be
aligned with the holder grooves and the distance.
6) Access the Service Menu and select ELEMENT XFER POS
Service Menu
Elem Xfer Pos.
7) Change the value in the direction indicated in step 5. by 15
counts per mm of offset previously measured. i.e. If the offset is
-1mm then reduce the ELEMENT XFER OFFSET by 15.
8) Reset the machine so that it is ready to prepare another
element.
9) Repeat steps 1- 4 and check if the element is now aligned to
the holder grooves.
10) Repeat steps 5 – 9 until the element is aligned to the holder.
11) Run a number of books to verify the adjustment made has
solved the problem.
12) If no improvement is seen by changing the ELEMENT XFER
POS value return to the RTP that directed you here.
Summary of Contents for StreamWire
