General Procedures and Information
07/23/2020
GBC StreamWire
6-22
GP 6.3.19
A4 WIRE OFFSET
The A4 Wire Offset is an offset applier to the Element Transfer Position to
allow A4 elements to transfer more accurately.
NOTE: This setting is set by the factory and should not be adjusted
unless instructed to do so during an escalation.
If adjustments are required to the Element Transfer Position of A4 or letter
elements, go to
and adjust the Element Transfer Position
GP 6.3.20
HLDR TO CLSR F
The Holder to Closer F setting adjusts how far the holder moves when
mating with the closer while binding an F size element. Increasing this
value will result in the element being lower when it meets the closer,
increasing it will raise the position of the element when they meet. This
setting does not affect the holder behavior when non-F size spools are
installed in the machine.
NOTE: This setting is only visible when an F size spool is installed in
the eWire.
Using the procedure described in
, enter Service mode.
Use the up and down arrows to scroll down to the HLDR TO CLSR F
HLDR TO CLSR F
*
The below screen will appear
HLDR TO CLSR F
*
0
0 is the default setting. Holder to Closer F can be adjusted on a range of 0
to +50. When the desired value has been selected, press OK/ENTER
to return to the service menu.
Select EXIT and press OK/ENTER to return to the top level menu
Summary of Contents for StreamWire
