![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657350.webp)
GBC StreamWire
07/23/2020
General Procedures and Information
6-13
GP 6.3.4
FUNCTION TESTS Procedure
Do the following to perform Functional Tests. The Functional Test feature
allows you to test the operation of various sub-assemblies and machine
operations within the eWire.
Enter Service Mode by following the procedure described in
Press the down arrow until the return symbol is next to the words
FUNCTION TESTS. Press OK/ENTER.
FUNCTION TESTS
NOTE: Use extreme caution if running any Functional Tests with
Interlock Cheaters installed. Injury or machine damage could occur
when running the functional tests. Keep hands free of all moving
parts while performing this procedure.
After the Functional Test cycle is completed it will stop automatically.
If necessary, press the OK/ENTER button again to repeat the Functional
Test.
Use the arrows to scroll down to Previous Menu to return to the
Functional Test Screen
Use the arrows to scroll down to Exit to exit Service Mode and return to
the top level screen.
The following Function Tests are Available through Service Menu:
•
Element Cycle
: This opens a sub menu containing the following
function tests relating to the Element Feeder
o
Feed Element:
The Element Feeder will feed and cut enough
element to produce one book of the size selected. It will then
transfer the element to Holder and move it to Stack Position. If
the feeder drawer is out when the function is run then the
element will be dropped by the expanding T to the right of the
spool
o
Partial Close:
After performing the Feed Element function, this
will bring the closer to the holder, perform a partial close of the
element, and remain at the holder.
o
Full Close
: After performing the Feed Element function, this will
bring the closer to the holder, close the element, return the
closer home, and eject the element into the Book Drawer Tray.
o
Feed/Close Auto
: This will run the element cycle continuously
with or without a spool present. This is used in manufacturing
setup.
•
Tray Home:
Will home the Book Drawer Tray. If the tray is
already in the up position, it will move down slightly and then
return to home.
•
Cycle Tappers:
Front and Rear Tapper Modules will cycle one
time.
•
Element at Closer:
Holder and Closer Modules will return to their
home positions.
•
Aligner Test:
The aligner motor will cycle back and forward.
•
Fans:
The vacuum stacker fan will run continuously.
•
Closer Cycle:
The closer jaws will close and open once.
•
Closer Adj Pos:
The closer will rotate to make the timing
fastener accessible.
•
Knife Cycle:
The Knife will close and open once. Use extreme
caution when running this with interlock cheats installed and
make sure hands are clear of the knife blade.
•
Pushover:
The Pushover module will cycle out or home as
selected by the user.
•
Holder Rotates:
Holder will rotate horizontally or vertically as
selected by the user.
•
Holder to Xfer:
Holder will move forward to mate with the
Element Feeder.
•
Transfer Setup:
An element will be fed, cut and picked up by the
expanding-T. It will then move over close to the holder by
pressing the arrow buttons. This enables checking the alignment
of the element to the holder.
Summary of Contents for StreamWire
