![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657055.webp)
GBC StreamWire
07/23/2020
RTPS
2-40
6. Do GP 6.5 to check M9 Element feed sprocket motor
This clears the fault
Yes
- Return to normal operation;
No
- Go to step 5
7. Inspect the Element sprocket nose sub-assembly for any damage.
Element sprocket nose sub-assembly is damaged.
Yes
- Replace the Sprocket Nose sub-assembly (REP 3.13);
No
- Go to Step 6
8. Do GP 6.5.5 Check M9 and M10
This clears the fault
Yes
- Return to normal operation;
No
- Go to Step 9
9. Do GP 6.3.5 FIRMWARE UPGRADE Procedure to Re-flash the
firmware for eWire.
This clears the fault
Yes
- Return to normal operation;
No
- Go to Step 10
10. Do REP 11.2 “B” Main Control Board Replacement
.
This clears the fault
Yes
- Return to normal operation;
No
- Escalate to level two
RTP 4.16 J365- M9 MESH STEPS TIMEOUT
J365 is triggered when it takes longer than the specified time for the lead
edge of the element to mesh with the Element belt.
1. Ensure that the element is not tangled on the sprocket of the feed
section.
The Element is not tangled on the sprocket
Yes
- Go to Step 2
No
- Untangle the element and resume normal operation
2. Manually rotate the Element sprocket and ensure smooth operation.
Element tip does not catch corners when moved using the
sprocket
Yes
- Go to Step 3
No
- If the edge of an element catches a corner, trim the edge.
Resume normal operation
3. Check if the element spool is loaded properly.
Element spool is loaded properly
Yes
- Go to Step 4
No
- Remove the element spool and reinsert it properly
4. Do GP 6.5 to check M9 Element feed sprocket motor
This clears the fault
Yes
- Return to normal operation
No
- Go to step 5
5. Inspect the Element sprocket nose sub-assembly for any damage.
Element sprocket nose sub-assembly is damaged
Yes
- Replace the Sprocket Nose sub-assembly (REP 3.13)
No
- Go to Step 6
6. Do ADJ 1.4 Element Feed Belt Home Position.
This clears the fault
Yes
- Return to normal operation
No
- Go to Step 7
Summary of Contents for StreamWire
