GBC StreamWire
07/23/2020
General Procedures and Information
6-73
GP 6.13 Base Cleaning
Use this procedure to clean the bottom of the Element Feeder Drawer
.
Excessive paper dust or other debris may interfere with the function of the S20
sensor.
Warning
:
Make sure you disconnect the machine from its power source
before cleaning. Failure to observe this warning could result in death or
serious Injury.
See Section 0, page vii for other languages.
Maintenance Schedule
Clean if excessive debris or dust is seen in the vicinity, or if the S20
sensor appears not to be functioning correctly.
Removal Procedure
1. Open the Element Feeder Door and slide out the Element Feeder
Drawer.
2. Do GP 6.8
to remove the Supply Spool and
the Rewind Spool.
3. Remove the Spool Detect Cover by removing the M4 Screws (3).
4. Remove the Rear Baffle by removing the M4 Screws (6)
Cleaning Procedure
Use a vacuum, compressed air, and/or a cloth to remove any paper, dust
or other debris. Take care not to damage or dislodge the wire leading to
the S20 sensor.
Installation Procedure
1. Reverse the steps in the Removal Procedure.
Caution:
Do not
overtighten the button head screws.
2. Connect the Power Cord.
3. Power ON the eWire.
Summary of Contents for StreamWire
