Repairs/Adjustments
07/23/2020
GBC StreamWire
4-14
REP 2.2 Drive Roller Replacement – Steering Module
PARTS LIST ON PL 5.5
Use this procedure to remove and install the Steering Module Drive Roller
Assembly, Nips
N3 and N4.
Removal Procedure
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Raise the Upper Bypass Panel
4. Do REP 2.21
Module from the Machine.
5. Remove the Panel Assembly by removing the M3 Nuts (4) on the
underside of the Panel Assembly, located just above the rollers.
6. Remove the Drive Panel assembly by removing the M3 Nuts (4).
Set the Idler and Drive Panel assemblies aside.
7. Remove the E-Ring, Compression Spring, and Washer from the
Steering Drive Roller Shaft.
8. Loosen the M3 Screws on the Steering Module Stepper Motor to
relieve tension on the Drive Belt.
9. Slide the Steering Drive Roller Sub-Assembly (roller, pulley and
bearings) off the Drive Shaft.
10. Repeat the process for the opposite side.
Installation Procedure
1. Install the Bearing and the Steering Drive Pulley onto the Steering
Drive Shaft. Ensure that an M6 washer is placed between the
bearing and the motor bracket. Refer to PL 5.5.
2. Install the Steering Drive Roller assembly and bearing onto the
shaft.
3. Install the M6 Washer, Compression Spring, and E-Ring onto the
shaft.
4. Repeat the procedure for the opposite side.
5. Re-attach the drive panel assembly by securing the M3 nuts (4).
6. Do REP 2.21
Module.
7. Connect the Power Cord.
8. Power ON the eWire.
Summary of Contents for StreamWire
