Repairs/Adjustments
07/23/2020
GBC StreamWire
4-144
REP 8.8 Holder Linear Motor Replacement M21
PARTS LIST ON PL 5.21
Use this procedure to remove and install the Closer Linear Motor, M21
Removal Procedure
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Do REP 1.5
Side Cover.
5. Loosen the Set screw securing the Drive Pulley to the Motor shaft.
6. Disconnect the Sensor Cable from the Closer Home Sensor S46
Closer Staged Sensor and Closer Home Sensor
).
7. Disconnect the Motor Cable from the Stepper Driver Board.
8. Remove the M4 Screws (4) to remove the Motor Mounting Bracket
from the Holder
9. Remove the Pulley and remove the Motor Bracket Assembly from
the Holder.
10. Remove the M4 Screws (4) to remove the Motor from the Mounting
Bracket.
Installation Procedure
1. Attach the new Motor to the Mounting Bracket using the M4
Screws (4).
2. Position the Mounting Bracket Assembly within the Holder and
secure it using the M4 Screws (4).
3. Attach the Pulley and Belt to the Motor shaft and tighten the set
screw.
4. Attach the Sensor Cable to the S46 Sensor and secure the
cables using the cable clamps on the Motor Bracket.
5. Connect the Motor Cable to the appropriate Stepper Driver.
6. Replace the Back and Side cover.
7. Connect the Power Cord and resume operation.
Summary of Contents for StreamWire
