![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657053.webp)
GBC StreamWire
07/23/2020
RTPS
2-38
RTP 4.14 J363- FEED BELT HOME STEPS TIMEOUT
J363 is triggered when it takes longer than the specified time for the
Element belt to feed the element. This can be caused due to a jammed
Element along the Element belt path.
1. Ensure there are no obstructions or residual fragment of the element
on the belt.
The Element belt is free of obstructions
Yes
- Go to Step 2
No
- Remove the obstructions and ensure smooth travel of the belt.
2. Manually rotate the Element belt and ensure smooth operation
The Element belt moves smoothly without any binding
Yes
- Go to Step 4.
No
- Go to Step 3
3. Inspect closely to determine where the binding occurs. Binding is
most likely to occur on the Element engagement guide, or the Track
assembly (PL 5.9).
Belt operates smoothly
Yes
- Go to Step 4
No
- Replace affected parts (PL 5.9)
4. Check if the element spool is loaded properly.
Element spool is loaded properly
Yes
- Go to Step 5
No
- Remove the element spool and reinsert it properly
5. Inspect the Element belt (PL 5.8.) Check for missing teeth or any
other damages
Element belt is in good condition
Yes
- Go to Step 6
No
- Replace the Element belt (REP 3.6)
6. Do GP 6.4 to check S25 Element belt home sensor
This clears the fault
Yes
- Return to normal operation;
No
- Go to step 7
7. Do ADJ 1.17 Element Feed Belt Tension Adjustment
This clears the fault
Yes
- Return to normal operation;
No
- Go to Step 8
8. Inspect Element feed belt idler for any damages or signs of wear (PL
5.9)
Element feed belt idler is in good condition
Yes
- Go to Step 9;
No
- Replace Element feed belt idler (REP 3.11)
9. Inspect Element belt idlers (2x) (PL 5.9)
Element belt idlers are in good condition
Yes
- Go to Step 10;
No
- Replace Element belt idler (REP 3.11)
10. Do GP 6.5 to check M10 Element feed belt motor
This clears the fault
Yes
- Return to normal operation;
No
- Go to step 11
11. Do GP 6.3.5 FIRMWARE UPGRADE Procedure to Re-flash the
firmware for eWire.
This clears the fault
Yes
- Return to normal operation;
No
- Go to Step 12
Summary of Contents for StreamWire
