GBC StreamWire
7/23/2020
Repairs/Adjustments
4-23
REP 2.11 Stepper Motor Pulley Replacement
PARTS LIST ON PL 5.4
Use this procedure to remove and install the Stepper Motor Pulley
(7715201). The Stepper Motor Pulley is used with Stepper Motors M1 and
M2.
Removal Procedure
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Do REP 1.1
Motor Driver (Stepper Driver) Replacement, M1 and
to remove the appropriate Stepper Motor and Mount.
5. Slide the Stepper Motor Pulley off the Motor shaft.
Installation Procedure
1. Press the new Stepper Motor Pulley onto the shaft of the Stepper
Motor.
Motor Driver (Stepper Driver) Replacement, M1 and
to replace the Stepper Motor and Mount.
4. Connect the Power Cord.
5. Power ON the eWire.
REP 2.12 Timing Belt Tensioner Replacement
PARTS LIST ON PL 5.4
Use this procedure to remove and install the Timing Belt Tensioner
Assembly.
Removal Procedure
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
6. Switch power OFF to eWire.
7. Disconnect the Power Cord.
8. Do REP 1.1
9. Remove the M4 Nuts on the Tensioner and carefully remove the
Tensioner Assembly from the Bypass Panel.
Installation Procedure
1. Place the new Tensioner Assembly onto the M4 studs and loosely
attach the M4 nuts. Ensure the Idler Pulley on the Tensioner
Assembly is lightly pressing the Timing Belt.
2. Adjust the Belt tension. The belt should be taut but still be able to
flex approximately 1” when you press on it.
3. Tighten the Tensioner mounting bolts when you have achieved
correct Belt tension.
5. Connect the Power Cord.
6. Power ON the eWire.
Tensioner
Summary of Contents for StreamWire
