![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657072.webp)
GBC StreamWire
07/23/2020
RTPS
2-57
RTP 5.16 J386- HOLDER FULL RIGHT TIMEOUT
J386 is triggered when it takes longer than the specified time for the
Holder to reach S36 Holder Position at Closer.
1. Do GP 6.5 to check S36 Holder at Position at Closer.
This clears the fault
Yes
- Return to normal operation;
No
- Go to Step 2
2. Check the Condition of the Holder Linear Drive Belt- Front and Rear
(PL 5.21)
The timing belt is in good condition. There are no missing teeth
and the belt is not frayed
Yes
- Go to Step 3;
No
- Replace the damaged timing belt (REP 8.11, 8.12) and resume
operation
3. Check the tension of the Holder Linear Drive Belt- Front and Rear
(ADJ 1.6)
The tension of the timing belts is good
Yes
- Go to Step 4
No
- Do ADJ 1.6 to set the belt tension and resume operation
4. Visually check if the rollers of the Holder are centered in the cam
tracks.
The rollers are centered in the cam tracks
Yes
- Go to Step 5
No
- Loosen the cam track assembly and bring the roller inside the
cam track. Resume operation
5. Check if the set screws on all the six pulleys associated with the
Holder linear drive are tight
The set screws are tight
Yes
- Go to Step 6
No
- Tighten the loose set screw(s) and resume operation
6. Manually move the Holder linear mechanism and watch if S36 Holder
at Closer position sensor is properly blocked/unblocked.
The sensor is blocked/unblocked properly
Yes
- Go to Step 7;
No
- Escalate to second level
Summary of Contents for StreamWire
