GBC StreamWire
07/23/2020
RTPS
2-33
6. Inspect Element transfer racks (PL 5.13)
Element transfer racks are in good condition
Yes
- Go to Step 7;
No
- Replace Element transfer racks (REP 3.15.4)
7. Inspect Element transfer gears (PL 5.13)
Element transfer gears are in good condition
Yes
- Go to Step 8;
No
- Replace Element transfer gears (REP 3.15.4)
8. Do GP 6.3.5 FIRMWARE UPGRADE Procedure to Re-flash the
firmware for eWire.
This clears the fault
Yes
- Return to normal operation;
No
- Go to Step 9
9. Replace the Element transfer module (REP 3.15)
This clears the fault
Yes
- Return to normal operation;
No
- Go to Step 10
10. Do REP 11.2 “B” Main Control Board Replacement
.
This clears the fault
Yes
- Return to normal operation;
No
- Escalate to second level
RTP 4.8 J333- S33 EXPAND T OUT TIMEOUT
S33 Expand T Out timeout is the maximum time to wait for the Expand T
to reach its home position
1. Do GP 6.4 to check S33 Expanding T Out sensor
This clears the fault
Yes
- Return to normal operation;
No
- Go to Step 2
2. Do GP 6.5 to check M13 Expanding T motor
This clears the fault
Yes
- Return to normal operation;
No
- Go to step 3
3. Inspect the Expanding T cam assembly (PL 5.13). Check for the
tightness of set screw in the motor shaft; signs of wear on the cam
surface.
Expanding T cam is secured tightly with the set screw, and the
cam surface is in good condition
Yes
- Go to Step 4;
No
- If the set screw is loose, tighten it. If the cam surface is worn,
replace the cam assembly. Refer to REP 3.15.9
4. Inspect Expanding T arms (PL 5.13).
Expanding T arms are straight and in good condition
Yes
- Go to Step 5;
No
- Replace Expanding T arms (REP 3.15.12)
5. Inspect Expanding T springs (PL 5.13).
Expanding T springs are in good condition
Yes
- Go to Step 6;
No
- Replace Expanding T springs (REP 3.15.12)
Summary of Contents for StreamWire
