![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657352.webp)
GBC StreamWire
07/23/2020
General Procedures and Information
6-15
GP 6.3.6
ELEMENT SETTINGS Procedure
The Element Settings option allows the user to change the position of the
“Holder at Stack” and “Holder at Closer” positions. Changing this value
will cause the travel of the Holder to be slightly more or less at the
position selected.
Enter Service Mode by following the procedure described in
Press the down arrow until the return symbol is next to the words
ELEMENT. Press OK/ENTER.
ELEMENT
STACK POSITION
0
Note the current value before making any changes, so you have a
reference point to return to.
The stack position can be changed on a range of -50 to +50
Any changes made to STACK POSITION will apply only to the selected
element size. The settings will be remembered when running that size in
the future, but other sizes will not be affected.
Press OK/ENTER to save the selected value. You will return to the
service menu.
GP 6.3.7
DEFLECTOR Procedure
The Deflector position setting will change the timing offset for the
Deflector module. This menu is a duplicate of the Deflector option in the
User settings menu. The default value is 0. The timing offset relates to the
amount of time that passes from the Deflector Sensor detecting a sheet to
the deflector solenoids firing.
Enter Service Mode by following the procedure described in
Press the down arrow until the return symbol is next to the words
DEFLECTOR. Press OK/ENTER.
DEFLECTOR
Note the current value before making any changes, so you have a
reference point to return to.
DEFLECTOR
0
The deflector timing can be changed on a range of -5.0mm to +5.0mm.
Press OK/ENTER when the desired value is flashing to save the Deflector
settings. You will return automatically to the service menu.
Any changes made to the Deflector Timing values will apply only to the
currently installed element size. The settings will be remembered when
the same size is installed again, but other sizes will not be affected. If no
spool is currently installed, an error message will occur.
Summary of Contents for StreamWire
